Search Knowledgebase
Self-Test for Breath Alcohol
Test Overview
A breath alcohol test is an estimate of your blood alcohol concentration (BAC). The test measures the amount of alcohol in the air that you breathe out (exhale).
You can measure your own breath alcohol level with a simple hand-held device. If the device is calibrated and used according to the manufacturer's directions, it can provide an accurate estimate of your blood alcohol level. The home device is similar to, though not as precise as, the type of test used by police for suspected drunk drivers.
Within minutes of drinking alcohol, your blood alcohol concentration starts to rise. Unlike food, alcohol is absorbed directly through the walls of the stomach, goes into the bloodstream, and travels throughout your body and to your brain. This allows blood alcohol levels to increase quickly.
The amount of alcohol in your blood reaches its highest level about 60 minutes after drinking. But food in your stomach may increase the amount of time it takes for the blood alcohol to reach its highest level. Most of the alcohol is broken down in the liver. The rest of it is passed out of your body in urine and your exhaled breath.
You can buy breath alcohol devices to measure your BAC at many pharmacies or through the Internet.
- The manual device is a glass tube (or a balloon and a glass tube) containing crystals that change colour when exposed to alcohol from your breath. This device is less expensive than electronic meters.
- The electronic meter shows your BAC in a digital display window after you blow into a glass mouthpiece attached to the meter. This type of meter is more expensive than the manual type.
Many bars and restaurants provide their customers with free alcohol breath tests using one of these two methods. The devices are also used to monitor people in an alcohol rehabilitation centre or hospital.
Why It Is Done
The breath alcohol self-test is used to estimate your blood alcohol concentration (BAC). The results can help you decide whether it is safe to drive. This estimate of blood alcohol is not intended to represent your actual driving abilities. Your driving may be impaired even with a low BAC level, such as below 0.05.
The breath alcohol test offers one piece of information to help you make a safe decision about drinking and driving. The safest decision is always not to drive if you have been drinking.
BAC is commonly used by police and other legal authorities to determine whether a person is legally impaired and should not drive. In Canada, it is an offence to drive when your blood alcohol concentration (BAC) is over 0.08. In most provinces, drivers with BAC levels as low as 0.05 could also get penalties.
How To Prepare
General instructions
- Check the expiration date on the package. Don't use the test if the expiration date has passed.
- Store the testing device correctly. If the device should be stored in the refrigerator or kept in a cool place, make sure you place it in an appropriate storage area.
- Follow the instructions exactly. All test kits come with detailed instructions. Carefully read the instructions that come with your test before using it. Many test kits include a toll-free number you can call for more information.
- Note any special instructions you need to follow before you take the test. These might include avoiding certain foods or medicines.
- Follow every step of the instructions carefully.
- Prepare and handle everything exactly as the instructions tell you.
- Follow all the steps in sequence; don't skip any steps.
- If a step in the test needs to be timed, use a watch; don't guess.
- Know your limits. If you are colour-blind or have trouble distinguishing colours, have someone else read the test results for you. For some tests, you need to be able to see colour changes in a test area or window.
Specific instructions
- Wait at least 15 minutes after having an alcoholic drink before testing your BAC. Trace amounts of alcohol left in your mouth from a recent drink or the use of mouthwash or mouth spray, such as mouth sprays to relieve a sore throat, can give false results.
- Do not smoke for 1 to 5 minutes before testing your BAC. Do not blow smoke into the device.
- Take at least two separate readings 15 minutes apart.
How It Is Done
Manual (glass tube/balloon) test
To obtain a breath alcohol reading:
- Blow into the balloon that comes with the kit until the balloon is almost full. Use one long breath, not several small breaths.
- Attach the balloon mouthpiece to one end of the glass tube filled with bands of yellow crystals.
- Let the air flow slowly out of the balloon and through the tube for exactly 1 minute.
- Count the number of bands of coloured crystals in the tube that turn from yellow to green.
If your test has only the glass tube, blow through the tube for the amount of time in the instructions. Use one long breath, not several small breaths. Then look at the coloured crystals to get the reading.
The amount of alcohol in your breath is based on the number of bands that change colour and on the intensity of the colour change.
Electronic breath alcohol meter
Follow the specific instructions that come with the device. With most meters, you:
- Turn on the meter and let it warm up for several minutes.
- Take a deep breath.
- Place your lips tightly around the mouthpiece. Blow steadily and continuously into the machine for the correct amount of time (usually 4 to 6 seconds). Use one long breath, not several small breaths.
The results appear as a digital readout in a display window. It may show a red or green "traffic light" or an estimated blood alcohol concentration (BAC). After you obtain the first reading, press the reset button and do a second test.
How It Feels
There is no pain from a breath alcohol test.
Risks
There is no chance for problems from taking this test. You might feel slightly light-headed after taking the test.
Results
A breath alcohol test is an estimate of your blood alcohol concentration (BAC). The test measures the amount of alcohol in the air that you breathe out (exhale). Results are ready right away.
Manual (glass tube/balloon) test
To read the glass tube breath alcohol test, count the number of yellow bands of crystals that turn green.
- 1 green band roughly corresponds to a BAC of 0.00 to 0.05.
- 2 green bands roughly corresponds to a BAC of 0.05 to 0.10.
- 3 green bands roughly corresponds to a BAC of 0.10 to 0.15.
Electronic breath alcohol meter
Some electronic devices have a "traffic light" display.
- A green light means a BAC below 0.04.
- A yellow light means a BAC between 0.04 and 0.08.
- A red light means a BAC above 0.08.
Some devices display the results as an estimated BAC numerical value.
What Affects the Test
No home test is 100% accurate. The results may not be helpful if you:
- Have trace amounts of alcohol left in your mouth from an alcoholic drink or even a mouthwash.
- Smoke. Do not smoke for 1 to 5 minutes before doing the test.
- Have had a drink within 30 minutes of performing the test. Your actual blood alcohol level may continue to rise after the test.
What To Think About
A blood alcohol test is more accurate than a breath alcohol test. For more information, see the topic Blood Alcohol.
Driving under the influence of alcohol (DUI) can be deadly. Alcohol is involved in nearly half of all fatal highway accidents. Even mild intoxication can impair your ability to drive safely. At 0.06 BAC, your judgment and physical coordination are impaired. At a BAC of 0.08, your muscle coordination and driving ability are significantly impaired.
How much alcohol it takes to raise your blood alcohol level depends on:
- The amount of alcohol you drink.
- How fast you drink the alcohol.
- Your weight.
- Your age.
- How fast your body breaks down (metabolizes) the alcohol. Different people metabolize alcohol at different rates.
- Your sex.
- The amount of food in your stomach when you drink.
Factors that affect how quickly the blood alcohol level rises in the body include:
- The number of drinks per hour. As you increase the number of drinks per hour, your blood alcohol level steadily increases.
- The strength of alcohol (proof or percentage) in the drink.
- Your weight. The more you weigh, the more water is present in your body, which dilutes the alcohol and lowers the blood alcohol level.
- Your sex. Women's bodies typically have less water and more fat than men's bodies. Alcohol does not go into fat cells as well as other cells, so women tend to retain more alcohol in their blood than men do. Also, a woman's hormones may affect the breakdown of alcohol.
- Your age. One drink raises the blood alcohol level of an older adult 20% more than it does for a young adult.
- The presence of food in your stomach. Food in the stomach absorbs some of the alcohol. The blood alcohol level will be higher if you do not eat before or during drinking.
- Other medicines or drugs. A person who drinks alcohol and takes certain medicines, such as antihistamines or sedatives (tranquilizers), may feel more of the effects of alcohol. Also, a person who uses other drugs, such as marijuana, will feel the effects of both drugs more than if the drugs were used separately.
Effects of drinking alcohol
Having any amount of alcohol in the blood can cause poor judgment and slowed reflexes. BAC and the effects of drinking alcohol vary from person to person and depend upon body weight, the amount of food eaten while drinking, and each person's ability to tolerate alcohol.
| Estimated blood alcohol concentration (BAC) | Observable effects | |
|---|---|---|
0.02 | Relaxation, slight body warmth | |
0.05 | Sedation, slowed reaction time | |
0.10 | Slurred speech, poor coordination, slowed thinking | |
0.20 | Difficulty walking, double vision, nausea, vomiting | |
0.30 | May pass out, tremors, memory loss, cool body temperature | |
0.40 | Difficulty breathing, coma, possible death | |
0.50 and greater | Death | |
You can buy breath alcohol tests on the Internet, either directly from the manufacturer or from a company that sells this kind of product. If you have access to the Internet, you can find this information by searching for the type of test or the name of the manufacturer.
References
Other Works Consulted
- Pagana KD, Pagana TJ (2010). Mosby’s Manual of Diagnostic and Laboratory Tests, 4th ed. St. Louis: Mosby Elsevier.
Credits
| By | Healthwise Staff |
|---|---|
| Primary Medical Reviewer | Kathleen Romito, MD - Family Medicine |
| Primary Medical Reviewer | Brian D. O'Brien, MD - Internal Medicine |
| Specialist Medical Reviewer | R. Steven Tharratt, MD, MPVM, FACP, FCCP - Pulmonology, Critical Care Medicine, Medical Toxicology |
| Last Revised | July 9, 2010 |
- Top of Page
Next Section:
Why It Is Done
Previous Section:
Test Overview- Top of Page
Next Section:
How To Prepare
Previous Section:
Why It Is Done- Top of Page
Next Section:
How It Is Done
Previous Section:
How To Prepare- Top of Page
Next Section:
How It Feels
Previous Section:
How It Is Done- Top of Page
Next Section:
Risks
Previous Section:
How It Feels- Top of Page
Next Section:
Results
Previous Section:
Risks- Top of Page
Next Section:
What Affects the Test
Previous Section:
Results- Top of Page
Next Section:
What To Think About
Previous Section:
What Affects the Test- Top of Page
Next Section:
References
Previous Section:
What To Think About- Top of Page
Next Section:
Credits
Previous Section:
References- Top of Page
Last Revised: July 9, 2010
This information does not replace the advice of a doctor. Healthwise, Incorporated disclaims any warranty or liability for your use of this information. Your use of this information means that you agree to the Terms of Use. How this information was developed to help you make better health decisions.
To learn more visit Healthwise.org
© 1995-2011 Healthwise, Incorporated. Healthwise, Healthwise for every health decision, and the Healthwise logo are trademarks of Healthwise, Incorporated.